Category: Tips and Advice

Categories
Heating HVAC HVAC Upgrades Tips and Advice

Energy-Efficient Tips for Cold Weather Months

As temperatures drop, keeping your home warm while saving on energy costs is essential. By implementing smart strategies, you can maintain comfort, reduce your energy bills, and lower your environmental impact. Here are practical energy-efficient tips to help you stay cozy during the colder months.

Seal Air Leaks to Stop Drafts

Drafty windows and doors can let precious heat escape, forcing your heating system to work harder. Inspect windows, doors, and other potential leak points for gaps. Use weatherstripping or caulk to seal these areas and keep cold air out. This simple fix can significantly improve comfort and reduce heating expenses.

Insulate Your Home for Better Heat Retention

Proper insulation is crucial for keeping your home warm and energy-efficient. Check your attic, walls, and floors to ensure they are adequately insulated. Adding insulation in under-insulated areas prevents heat loss, reduces energy consumption, and enhances overall comfort.

Maintain Your Heating System for Maximum Efficiency

Regular maintenance of your heating system is key to ensuring it operates efficiently. Replace air filters monthly to improve airflow and schedule professional inspections to address any issues. A well-maintained system not only saves energy but also extends the lifespan of your equipment.

Install a Programmable Thermostat for Smarter Heating

A programmable thermostat allows you to set your home’s temperature according to your schedule. Lower the heat while you’re away or asleep, and raise it when you’re home. This simple adjustment can result in significant energy savings without sacrificing comfort.

Optimize Window Treatments to Trap Heat

Make the most of natural sunlight during the day by opening curtains on south-facing windows to let in warmth. At night, close curtains to trap the heat inside and block out the cold. Insulated or thermal curtains provide an added layer of energy efficiency.

Lower Water Heater Settings to Save Energy

Your water heater is one of the largest energy consumers in your home. Set it to 120°F to save energy without sacrificing comfort. Additionally, insulating the water heater and pipes can reduce heat loss and lower your energy bills.

Use Ceiling Fans to Circulate Warm Air

Ceiling fans aren’t just for summer! Set them to rotate clockwise at a low speed during the winter months. This helps push warm air that naturally rises back down into the room, improving comfort and reducing the load on your heating system.

Stay Warm While Saving Energy

By following these energy-efficient tips, you can create a cozy home environment while keeping your energy usage under control. Small adjustments like sealing air leaks, maintaining your heating system, and using a programmable thermostat can make a big difference in both comfort and cost.

Need Professional Help? Contact Ellis Air Conditioning and Heating

At Ellis Air Conditioning and Heating, we specialize in energy-efficient solutions to keep your home warm and your energy bills low. Whether you need system maintenance, an upgrade, or expert advice, our technicians are here to help. Contact us today to learn more about our services and schedule an appointment.

Categories
AC Heating HVAC Tips and Advice

What You Need to Know About Carbon Monoxide

Carbon monoxide (CO) is an invisible, odorless gas that poses serious risks to your health and safety. Often referred to as the “silent killer,” carbon monoxide can infiltrate your home without warning, making awareness and prevention critical. This guide covers what you need to know about carbon monoxide, its dangers, and how you can protect your family.

What Is Carbon Monoxide?

Carbon monoxide is a byproduct of burning fuels such as natural gas, propane, wood, oil, and coal. Appliances like furnaces, water heaters, fireplaces, and stoves can emit carbon monoxide if they aren’t properly maintained or vented. Since the gas is colorless and odorless, it’s impossible to detect without specialized equipment.

Common Sources of Carbon Monoxide

  • Malfunctioning or poorly ventilated furnaces.
  • Gas stoves or ovens left running for extended periods.
  • Blocked chimneys or flues.
  • Vehicles left idling in garages.
  • Portable generators or space heaters used indoors.

The Dangers of Carbon Monoxide Exposure

Exposure to carbon monoxide can lead to serious health complications and, in severe cases, death. Understanding the symptoms of carbon monoxide poisoning can help you act quickly.

Symptoms of Carbon Monoxide Poisoning

  • Mild Exposure: Headaches, nausea, dizziness, and fatigue.
  • Prolonged Exposure: Confusion, chest pain, and impaired judgment.
  • Severe Exposure: Loss of consciousness, brain damage, and death.

If you suspect carbon monoxide poisoning, evacuate the area immediately and seek medical attention.

How to Prevent Carbon Monoxide Poisoning

Taking proactive measures can significantly reduce the risk of carbon monoxide poisoning in your home.

Install Carbon Monoxide Detectors

  • Place detectors near bedrooms and on every level of your home.
  • Test detectors regularly and replace batteries as needed.
  • Consider interconnected detectors for comprehensive coverage.

Maintain Your HVAC System

  • Schedule annual furnace and HVAC maintenance to ensure they are functioning properly.
  • Check for cracks or leaks in heat exchangers and ventilation systems.
  • Ensure chimneys and flues are clear of debris and properly vented.

Learn more about HVAC maintenance and how it can improve safety.

Use Appliances Safely

  • Avoid using gas ovens for heating your home.
  • Never run a generator or grill indoors, even in a garage.
  • Ensure space heaters are vented and used in well-ventilated areas.

Recognizing a Carbon Monoxide Emergency

Knowing how to respond during a carbon monoxide emergency can save lives. If your carbon monoxide detector alarms or you experience symptoms of poisoning, follow these steps:

  1. Immediately evacuate everyone from the home.
  2. Call 911 and inform emergency responders of the situation.
  3. Do not re-enter the home until it has been inspected and deemed safe.

The Role of Your HVAC System in Carbon Monoxide Safety

Your HVAC system plays a vital role in maintaining a safe home environment. Proper maintenance ensures your system operates efficiently and prevents potential carbon monoxide leaks.

Annual Furnace Inspections

  • Professional technicians can detect and fix issues like cracked heat exchangers or clogged vents.
  • Inspections ensure that combustion processes are safe and efficient.

Air Quality Monitoring

  • Advanced HVAC systems can include air quality monitors to detect harmful gases.
  • Regular duct cleaning prevents blockages that could lead to dangerous backflow.

Trust Ellis Air Conditioning and Heating for Your Safety Needs

At Ellis Air Conditioning and Heating, we prioritize your safety and comfort. Our experienced technicians provide comprehensive HVAC maintenance, ensuring your system operates safely and efficiently. From furnace inspections to indoor air quality solutions, we’re here to help protect your family from carbon monoxide risks. Contact us today to schedule an HVAC inspection or learn more about our services. Together, we can create a safer, healthier home for you and your loved ones.

Categories
Heating HVAC HVAC Upgrades Tips and Advice

How to Shop for a New Furnace

Your furnace is the main component of your HVAC system that keeps you warm. Air conditioning lowers your indoor air temperature when it’s too hot outside, and your furnace does the opposite. If you’re on the market for a new furnace, there are some things you need to consider before you make a purchase. Your furnace is a big investment, so make sure you’re getting the right one for your home. Know What You’re Looking For Not all furnaces are created equally. Your home’s size, location, layout, and insulation are all factors that can change the kind of furnace you’ll need to help you keep your home warm and comfortable. Before you go looking for your new furnace, consider problems you might have had with the last one you owned. Were there any rooms you had trouble controlling the temperature of? Did the furnace cost too much on your electric bill? Fixing these issues might mean investing in a more expensive furnace, but it’s better to get more out of a higher quality product than to settle for something cheaper. Have goals in mind for your new furnace before you start shopping and try to find a furnace that meets your needs.

Find The Right Type Of Furnace

There are four main types of furnaces on the market, and they all come with their own benefits and drawbacks. 

The first type of furnace is a natural gas furnace, which is one of the most economical options on the market. These furnaces have also become much more efficient over the years, with the average efficiency rising from 65% to 98%. Nearly half og the country uses natural gas furnaces in their homes. 

Oil furnaces, a type of furnace most common in the northeast parts of the US, are about 25% cheaper than natural gas furnaces. They might be a more affordable option, but oil furnaces aren’t the best choice for the environment. The average oil furnace has an efficiency of 80%-90%. 

An electric furnace is a better alternative for the environment, and they come at lower upfront costs than other furnaces. Electric furnaces could go for half of the price of a gas furnace. They also last up to ten years longer on average. Unfortunately, the electricity is going to have a higher monthly cost than a gas furnace.

If gas and oil aren’t easy resources to come by in your area, you might have to get a propane furnace. Propane is an oil and gas byproduct that can also be used as a source of energy, and it powers about 10% of homes in the US.

Other Considerations

One of the most important things to consider when looking for a new furnace is size. Make sure you’re getting a furnace that can effectively heat every room in your home without overconsuming energy and driving your gas or electric bill up. 

You should also take a good look at customer reviews of any furnace you’re thinking about buying. It’s best to find out about common problems with the system before you purchase it, so you can either steer clear or know what to expect.

Your climate and location should also be a consideration while you’re furnace shopping. How many months out of the year will you be using your furnace, and what resources are readily available in your area? 

Quality HVAC Services With Ellis AC

Ellis AC offers HVAC maintenance, repairs, and replacements with top-notch service at prices you can afford. Your satisfaction is always our top priority, so call or visit our website for a free quote on our stellar HVAC services today!

Categories
AC Heating HVAC Tips and Advice

How to Troubleshoot Problems with Your Furnace

The weather is finally getting colder, which means many of us are turning our furnaces on for the first time in months. It’s important to have your furnace checked by an HVAC professional on a bi-annual basis, but you’re bound to run into furnace troubles no matter how well you take care of your HVAC system. Here are a few things you can do to troubleshoot your furnace problems before resorting to calling a professional.

Check Your Thermostat

First, play around with your thermostat settings. Make sure it’s set to the ‘heat’ mode and that the temperature is where you want it, just in case somebody else in the home adjusted it. If the temperature is correct, turn it up a couple of degrees and see if that makes a difference.

If your thermostat is battery-powered, now is a great time to replace the batteries. A thermostat with a dead battery won’t be able to connect with your furnace, so take them out and put new ones in to see if it changes anything.

Check the Fuse Box

It’s possible that you’ve just blown a fuse and your furnace isn’t receiving power. Check the circuit breaker, or fuse box, and locate the ‘furnace’ switch. If your fuse box switches aren’t labelled, check for any switch facing the opposite direction of all the other switches and flip it back where it belongs.

Change the Filter

Not only does your furnace filter keep your indoor air clean, but it’s also specially designed to allow proper air flow. When your filter gets too dirty, it can cause air quality issues and overheat your furnace, causing it to shut off. That’s why it’s important to make sure your furnace filter gets changed on a regular basis, at least every 30-90 days. Check your furnace filter by taking it out and holding it up to the light. If you can’t see through the filter anymore, it’s time for a replacement. Be sure to check your filter’s size and strength so you can get the right one for your furnace.

Look for Gas Leaks

A more serious explanation for your furnace problems is a gas leak. Carefully check your valve to see if it somehow got turned off. It’s important to call an HVAC professional immediately if you smell gas. Gas leaks are a potentially dangerous issue that are best handled by an experienced HVAC technician.

Quality HVAC Services with Ellis AC

If these troubleshooting tips don’t work for your furnace, or if you suspect a bigger issue with your HVAC system, the experienced HVAC technicians at Ellis AC are always happy to help. We offer stellar HVAC maintenance, repairs, and replacements at prices you can afford, and our team always values the satisfaction of our clients above all else. When we’re done working on your system, we’ll tell you everything you need to know about what you can do to give it a longer lifespan and get the most out of it. Call or visit our website for more information or a free quote on our HVAC services today!

Categories
AC Heating HVAC Tips and Advice

Your Guide to Troubleshooting Air Conditioning Issues

Air conditioning is essential to keep your home healthy and comfortable, but what should you do if your air conditioner isn’t working? It’s best to call for an inspection from an HVAC professional, but simple issues can usually be fixed with a little bit of troubleshooting. Before picking up the phone, see if any of these suggestions get your air conditioner running smoothly again.

Replace your Filter

Your air conditioner’s air filter serves a few important functions. It improves your home’s air quality, removes bacteria and other harmful particles, and allows air to pass through it freely. If your filter goes too long without being changed, it could worsen your indoor air quality and cause serious air flow problems for your AC. Take your filter out and hold it up to the light. If you can see through the filter, it doesn’t need to be changed yet. If you can’t see through it anymore, take a picture of the measurements and strength of the filter and buy a replacement.

Check Air Vents

Your air vents could be the cause of your issues, so be sure to thoroughly check them for any blockages that could cause air flow issues. When vents get too clogged with dirt, dust, and other particles, they can’t let air flow properly. Even if you don’t see a blockage in your vents, you might have a blockage in your inner ductwork that should be inspected and taken care of by an HVAC professional.

Inspect the Thermostat

Sometimes the simplest answer is the correct answer. Maybe someone else in the house changed the thermostat settings and you didn’t notice. Make sure the thermostat is set to cooling rather than heating, and see if the temperature is what it’s supposed to be at. Adjust these settings as needed and see if anything changes. If the settings are correct and it still isn’t working, try lowering the temperature a few degrees and see if that makes a difference. If none of that works, replace the batteries in your thermostat and try again.

Check the Circuit Breaker

If your circuit breaker has blown a fuse, your air conditioning might not be working because it isn’t receiving power. To see if this is the case, locate your fuse box or circuit breaker and open it up. If your switches are labeled, you can easily find the right one. If not, locate the switch facing the opposite direction of all the other switches. Flip this switch back and mess with your thermostat again to see if the power returns.

Call Ellis AC for Professional HVAC Services

If these troubleshooting tips don’t work for your air conditioning, the experienced HVAC technicians at Ellis AC are always happy to help. We offer stellar HVAC maintenance, repairs, and replacements at prices you can afford. Our team always values the satisfaction of our clients above all else, and we’ll tell you everything you need to know to get the most out of your HVAC system. Call or visit our website for a free quote on our top-notch HVAC services today!

Categories
AC HVAC HVAC Upgrades Tips and Advice

Why is Your Air Conditioning Running All the Time?

Knowing how much AC is too much can be a challenge. There are normal explanations for an overactive air conditioning system, like when it’s hotter outside or when your thermostat is set too low. Still, an air conditioner that runs all the time can spike your electric bill and it might be a sign of a bigger issue with your HVAC system as a whole. Here’s everything you need to know about why your air conditioning might be running all the time.

Normal Causes

Before assuming something is wrong with your air conditioning, think about the very normal reasons this may be happening. Air conditioning typically runs more frequently during the spring and summer months when the difference between your thermostat and the outdoor temperature is at its highest. This causes the system to run for longer periods of time to reach your desired indoor temperature. However, you should still be able to hear your system turn off and on.

When it Becomes a Problem

There are some indicators that your AC is running too often. If you literally never hear your air conditioning turn off, this isn’t normal. Your AC should be turning off and on throughout the day, even if it’s running more often. 

If your electric bill spikes, your air conditioning might be using more electricity than normal to cool your home. This can indicate a problem in the system that makes it less energy efficient.

Lastly, if your system is running all the time but still isn’t cooling your home to meet the thermostat temperature, you should contact an HVAC repair team right away.

Reasons Your AC Might be Running All the Time

One possible cause of this problem is poor airflow. This can be caused by a dirty filter, blocked or closed vents, a poor motor, or leaks in the ductwork. You can test this by holding your hand to a vent. If you feel a weak stream of cold air, start by changing your filter and checking your vents for any blockages. If that doesn’t work, you should call an HVAC professional to repair your system.

Another cause could be a refrigerant leak. Refrigerants aren’t supposed to run out, so if your refrigerant is low it’s most likely a leak. An HVAC professional can fix a refrigerant leak for you.

Lastly, a constantly running AC system could be a symptom of an old HVAC system that needs to be replaced. The average HVAC system lasts approximately 15 years with regular maintenance. If your system is over ten years old and has to work harder and run longer to cool your home, it might be time to get a replacement.

HVAC Maintenance and Repairs With Ellis AC

Whether you need HVAC maintenance, repairs, or a replacement, Ellis AC can help. Our experienced team of HVAC technicians are dedicated to giving you great customer service and affordable repairs that last. Call or visit our website to learn more about our residential and commercial HVAC services today!

Categories
AC Heating HVAC Tips and Advice

Why is Mold Growing on my Air Vents?

HVAC systems have evolved over time to cool your home while improving your indoor air quality at the same time. Unfortunately, you’re still bound to encounter problems with your system that need to be addressed right away to keep yourself and your family healthy. Here’s everything you need to know if you’ve noticed mold growing on your air vents.

Signs of Mold in Your Air Ducts

The first sign of mold in your HVAC system is often a moldy or musty smell when your system is being used. HVAC mold is usually able to be smelled before it’s seen, so turn your system off and inspect it right away if you notice the smell of must, mold, or mildew coming from your vents. 

If you notice visible mold on your air vents, in the ducts, or in drip pans, call a professional as soon as possible. Visible mold might mean the problem has become too severe to be taken care of on your own.

If your family starts showing symptoms like nausea, fatigue, headaches, sneezing, coughing, or dizziness only in the house or only when your HVAC system is running, it might be caused by mold in your air ducts.

Why Does Mold Grow on Air Vents?

Mold favors environments with high humidity. When air passes through your air ducts, especially if the air outside is humid, water droplets can form and the moisture can become the perfect spot for mold to grow. Additionally, mold can grow quickly in your air ducts and vents because it can feed on the dirt, dust, dead skin cells, pollen and dander that builds up in your ducts.

How to Remove Mold from Your HVAC System

It’s important to use the right cleaner for mold removal. Some cleaners don’t actually kill mold cells, and the moisture from these cleaners can even allow the mold to secretly grow. For the best results, we recommend using a mix of one tablespoon of household detergent, a half tablespoon of baking soda, and one cup of water. You can also use one part bleach mixed with 16 parts water on non-porous surfaces. 

Before you start cleaning, be sure to protect yourself with a mask, thick gloves, safety goggles, and some form of protective clothing. 

Start by turning off the heating and cooling vents. Next, remove the vent and scrub it with a rag and your cleaning solution. Do the same inside the vent and repeat the process in any vents you suspect might have mold. For heavy mold growth, we recommend cleaning the same area at least twice. 

Dispose of the rags, your gloves, and anything else that comes into direct contact with the mold. Be sure to use a trash bag that’s at least six mil thick, and remove the trash bag from your house right away.

If you can’t reach all the mold on your own, call an HVAC professional. All mold should be removed to prevent future growth.

Quality HVAC Services with Ellis AC

Ellis AC offers top-notch HVAC maintenance, repairs, and replacements at prices you can afford. Our skilled HVAC technicians are dedicated to quality service and client satisfaction, so call or visit our website for a free quote today!

Categories
AC Heating HVAC Tips and Advice

How you can Prevent Household Heating Fires

When your home’s heating system is working overtime to keep you warm in the winter, it’s much easier for accidental heating fires to start in your home. To prevent this kind of disaster, it’s important to take certain safety precautions. Here’s what you can do to prevent a heating fire in your home when trying to stay warm.

Space Heater Safety

Space heaters are very affordable and convenient for warming cold spots in your home, but they’re also responsible for about 70% of winter home fires and fire-related deaths. It’s important to practice proper safety at all times when using a space heater, or else you could quickly have a fire on your hands.

First, be sure to purchase a space heater with an emergency shut-off feature. This will come in handy if your space heater gets knocked over, especially on carpet. Never leave a space heater unattended. If you’re leaving the room or going to bed, shut it off. Plug your space heater directly into the wall or a Ground Fault Interrupter (GFI) system. If you notice any malfunctioning or broken parts on your space heater, replace it. Malfunctioning space heaters can easily overheat and become unsafe. Lastly, try to only use your space heater on a flat, non-flammable surface and keep it away from flammable materials like curtains or bedsheets.

Chimney Maintenance and Cleaning

Be sure to have your chimney cleaned every year to avoid soot and creosote buildup, either by a professional chimney sweep or a creosote sweeping log. You should also regularly inspect your fireplace for cracks or air leaks that could lead to household fires by releasing flame or smoke into your home. 

If you don’t have a diffusion screen for your fireplace, it’s best to invest in one. These screens keep burning firewood logs from rolling out of your fireplace, and they also prevent sparks from jumping out into your floor. These are especially important if you have carpet or wooden flooring. Finally, keep the space around your fireplace free of any flammable objects and always keep an eye on your fireplace when you’re using it.

Smoke and Carbon Monoxide Detectors

You should perform regular checks on your smoke and carbon monoxide detectors. If a heating element malfunctions, a working smoke detector serves as a crucial line of defense to keep you and your family safe. Carbon monoxide detectors are important for detecting gas leaks from your furnace, which can be extremely flammable and cause carbon monoxide poisoning for you and your family. You should perform tests of your smoke and carbon monoxide detectors at least twice a year. If they appear to be broken or malfunctioning, replace them right away to keep your household safe.

Quality HVAC Maintenance with Ellis AC

Regular HVAC maintenance is a key part of keeping your household safe from heating fires. Ellis AC is one of the most trusted HVAC service providers in the DFW area, and we’re dedicated to giving our clients quality service at affordable prices. Our experienced team of HVAC technicians always puts client satisfaction first, so call or visit our website for a free quote today!

Categories
AC Heating HVAC Tips and Advice

How to Avoid Cold and Hot Spots in Your Home

Maintaining consistent temperatures throughout your home is essential for both comfort and energy efficiency. Uneven heating or cooling can lead to discomfort, higher energy bills, and frustration. Here are some effective strategies to eliminate hot and cold spots in your home and achieve balanced temperatures.

Ensure Unobstructed Air Vents

Blocked or closed vents can disrupt airflow, causing temperature inconsistencies. Regularly inspect all supply and return vents to ensure they are open and free from obstructions such as furniture, curtains, or debris. Proper airflow is crucial for even temperature distribution throughout your home.

Replace Air Filters Regularly

Dirty or clogged air filters restrict airflow, leading to uneven temperatures in your home. Replace your HVAC system’s air filters every 1-3 months to maintain optimal airflow and efficiency. Clean filters not only promote even temperatures but also improve indoor air quality.

Use Ceiling Fans to Distribute Air

Ceiling fans can help improve air circulation and distribute air evenly. During summer, set fans to rotate counterclockwise to push cool air down. In winter, switch them to rotate clockwise at a low speed to circulate warm air that rises to the ceiling, helping balance room temperatures.

Implement a Zoning System

A zoning system allows you to control the temperature in different areas of your home independently. By installing separate thermostats and dampers, you can adjust heating and cooling in specific zones, minimizing hot and cold spots and maximizing comfort.

Check for Air Leaks

Air leaks around windows, doors, and ductwork can cause temperature fluctuations and uneven cooling or heating. Seal any gaps or cracks with weatherstripping or caulk to prevent conditioned air from escaping and unconditioned air from entering, ensuring a consistent indoor climate.

Assess and Upgrade Insulation

Inadequate insulation can lead to heat loss in winter and heat gain in summer, causing uneven temperatures. Make sure your home, especially the attic and walls, is properly insulated to maintain consistent indoor temperatures and reduce the workload on your HVAC system.

Schedule Regular HVAC Maintenance

Regular HVAC maintenance is essential for keeping your system running efficiently. Professional inspections can identify and resolve issues such as duct leaks, system imbalances, or worn components that contribute to uneven temperatures in your home.

Achieve Comfort and Efficiency

By implementing these strategies, you can eliminate cold and hot spots in your home and create a more comfortable living environment. Balanced temperatures not only enhance your comfort but also help reduce energy costs and improve overall system efficiency. Take the time to inspect your home, address any problem areas, and schedule regular maintenance for long-term benefits.

Need Help? Contact Ellis Air Conditioning and Heating

If you’re struggling with uneven heating or cooling, Ellis Air Conditioning and Heating can help. Our expert technicians specialize in diagnosing and resolving HVAC issues to ensure your home is as comfortable and energy-efficient as possible. Contact us today to schedule an appointment!

Categories
AC HVAC Tips and Advice

Your Guide to Finding the Right Window AC Unit

If you’re living in a space with no central air, a window AC unit is your best option to combat the summer heat. These small units are powerful enough to cool 100-300 square feet of your home, making them ideal for dorm rooms and studio apartments. They can also be used to cool rooms in your home that aren’t reached by your HVAC system.

With so many window AC units on the market, all with their own unique capabilities, finding the right model can be a challenge. Here’s our best advice on finding a window AC unit to fit your needs.

Look at Reviews

Compare different window AC unit models by looking at their reviews online. Home improvement store product pages and consumer report sites are a great place to start. See what customers and professionals have to say about different models and eliminate any that don’t meet your standards. Pay attention to performance details like reliability, maintenance, installation, and overall customer satisfaction. This is a great way to narrow down your list of potential units and eliminate any that don’t offer what you need.

Think About Size

Measure your window to determine your size limitations, and then find the square footage of the room you need to cool. Consider how much sun the room gets and think about whether or not you’ll be using tools like blackout curtains and fans to give your window AC unit a boost. These factors will all help you decide on the ideal BTU (British Thermal Unit) for your unit. You can easily plug your measurements into a free online BTU calculator for the most accurate estimate.

Energy Efficiency

Every window AC unit has its own energy-efficiency rating (EER), which is a ratio of its BTU to its power input in watts. High efficiency systems are better for the environment, and they’ll deliver stronger air conditioning with lower energy consumption. A high efficiency system is more expensive, but it’ll save you more money on your electric bill. Lower efficiency systems cost less upfront, but their higher energy consumption can add up over time. 

Installation

Most window AC units are easily installed by the customer, but not everybody is up to the challenge. Try to find tutorial videos and online guides for the system you’re considering and ask yourself if you feel comfortable with the process. You can look around for one with the most straightforward installation process, ask for help from family or friends, or consult an HVAC professional to install the unit for you.

Quality HVAC Services with Ellis AC

If you need HVAC repairs or maintenance, or help installing your own window AC unit, the talented HVAC technicians at Ellis AC are here to help. Our family-owned and operated business is dedicated to quality HVAC services, great prices, and client satisfaction. We work hard to inform our clients on what they can do to get the most out of their HVAC system, including answering any questions you may have about HVAC maintenance. Call or visit our website for a free quote on our HVAC services today!